Disaster Mitigation in Flats: Evaluation and Design of A Disaster Preparedness

  • M. Ikhsan Setiawan Narotama University
  • Sri Wiwoho Mudjanarko Narotama University
Keywords: Mitigation, Flats, Quality Control.

Abstract

Law Number 24 Year 2007 on disaster Management, Mitigation is defined as a series of efforts to reduce disaster risk, either through physical development as well as awareness raising and capacity building facing the threat of disaster. Design of zoning into account key parameters, namely the earthquake zoning based seismic design category. Earthquake Disaster Mitigation in the Flats, Before Disaster: (1) Categorization of areas based on the characteristics of the earthquake zone (seismic zoning); (2) Research the characteristics of land on which will be built flats (flat), whether included soft soil or hard soil; (3) Making a clear evacuation path on the building of towers and the surrounding area; (4) The construction of towers based on building standards for residential / earthquake resistant buildings, ranging from foundation to finish by referring to the Building Codes in force, such as size of the building (the building that avoid angular or berkurva) and the configuration of the building; (5) Quality control of the implementation of the building starts from the initial stage to the final stage; (6) The use of special material for reinforcement (retrofitting material), from local materials that are easy to find while saving biaya.Saat Disaster, Following guidelines / procedures for emergency earthquake that have been enacted or have been given training by the manager of the flat to flat consumer tersebut.Setelah Happen disaster: (1) Checking of the condition of the flat dwellers who experience disasters; (2) Checking of the condition of the buildings are damaged, the type of damage (structural and non-structural), and measures anticipated; (3) Improved methods to save themselves; (4) Rehabilitation timely and build back better; (5) Maintenance and checks on the condition of the building towers at regular intervals.

Downloads

Download data is not yet available.

References

[1] ACI 318M-11. Building Code Requirements for Structural Concrete.
[2] AISC 360-10. Specification for Structural Steel Buildings. The American Institute of Steel Construction.
[3] ASCE / SEI 7-10. Minimum design loads for buildings and others structures.
[4] FEMA P-7502009. National Earthquake Hazards Reduction Program (NEHRP) earthquake recommended provisions for new buildings and others structures.
[5] IBC 2009 International Building Code.
[6] International Building Code, the ASCE / SEI 7-10. Minimum design loads for buildings and others structures.
[7] Decree of the Minister of Public Works No. 60 Year 1992 on Technical Requirements for Construction of Housing.
[8] National Earthquake Hazards Reduction Program (NEHRP). (2009). Recommended earthquake provisions for new buildings and othersstructures. IBC.
[9] Regulation of the Minister of Housing Number 14 Year 2014 on the Management of Housing sederahana Rental.
[10] Regulation of the Minister of Housing No. 22 of 2008 on Minimum Service Standards for Public Housing, Provincial and District / Municipal.
[11] Regulation of the Minister of Public Works No. 14 of 2013 on the Amendment Regulation of the Minister of Public Works No. 7 of 2011 on Standards and Guidelines for Procurement of Construction Works and Services Consultancy.
[12] Regulation of the Minister of Public Works No. 25 Year 2007 on Guidelines for Building Structures Function Certificates Feasibility.
[13] of Public Works Ministerial Decree No. 5 of 2007 concerning Technical Guidelines Development of High-Rise simple Flats.
[14] Public Works Ministerial Regulation Number 60 of 1992 on Housing Development Technical Requirements
[15] of Government Regulation No. 36 of 2005, concerning the Implementing Regulations of Law No. 28 of 2002 on Building.
[16] SEI / ASCE 7-10. Minimum Design Loads for Buildings and Structures Others.
[17] ISO 1727 in 2013 concerning the Minimum Expense For Designing Buildings and Other Structures on ISO 1729 2015 Specification for Structural Steel Buildings.
[18] ISO 2847 in 2013 of Concrete Structural Requirements for Building.
[19] SNI-03-1726-2012 on Earthquake Resilience Planning Procedures for Non Structural Building And Building.
[20] Law Number 24 Year 2007 on Disaster Management.
[21] Act No. 28 of 2002 on Building.
[22] www.vsi. esdm.go.id.
Published
2017-10-20
How to Cite
Setiawan, M., & Mudjanarko, S. (2017, October 20). Disaster Mitigation in Flats: Evaluation and Design of A Disaster Preparedness. INSCIENTECH: Journal of Industrial, Science and Technology, 1(1), 9-18. Retrieved from http://inscientech.org/index.php/ins/article/view/4
Section
Articles